欢迎来到中国河南中岳碳化硅电热元件生产商官网

致力于碳化硅电热元件的生产

中国河南中岳碳化硅电热元件生产商

24小时咨询热线

13939069448

新闻中心

掌握最新资讯

如何判断碳化硅棒的质量

When we buy silicon carbide rods, in order not to affect the use of equipment, we need to test them to determine the advantages and disadvantages of silicon carbide rods. So how to detect it? Here are several feasible methods:


1. judge from the surface of silicon carbide rod:
从硅碳棒的材质来区别,设备一般都是选用高纯度的碳化硅为原料;从硅碳棒的尺寸和规格已经接口的焊接部分来判断;在硅碳棒的发热部测阻过程以及后续使用寿命等,都可以对比硅碳棒的好坏。

2、Tested by instrument:
(1)Through detailed recording of ammeter data and temperature control meter output percentage. When the furnace temperature is stable at a certain temperature, if the rod is broken, the output percentage of the instrument will increase compared with the previous time period, and the current displayed by the ammeter will decrease.

(2)Compare the current value of two groups of silicon carbide rods inside and outside the same temperature zone and the percentage of instrument output. Under the same output percentage, the internal resistance current should be close to half of the external group current.

(3)Compare different temperature zones. When the temperature is the same, compare the output percentage and current value of the temperature control meter. Compare the internal resistance with the internal group, and compare the external group with the external group. When the temperature control meter outputs the same percentage, the current should be basically the same. Observe the furnace to see if there is a black ring. If there is an obvious black ring, it is more likely to break the rod.


The above is about the detection method of whether there is abnormality in silicon carbide rod. Through different test methods, we can judge more accurately. If conditions permit, the two methods can be used together. If problems are found during detection, they should be solved in time, and they should be repaired or replaced according to the actual situation to avoid affecting the progress of production.

上一篇: have run out 下一篇: 硅碳棒高温炉

相关产品推荐

高温窑炉用碳化硅高温元件详细说明:用于工业高温电窑炉升温热源,炉温稳定,易更换
Top
0.164710s